features

• At the lower segment of the cabin, the bullet-proof (B.P) steel plate of 6.5mm thickness should cover 48” height and 48” width on each of the three sides of armour coverage.

• At the middle segment of the cabin, the bullet-proof (B.P) glass of 50 mm thickness should cover 24” height and 48” width on all the three sides of armour coverage.

• The firing slots between the lower B.P steel segment and the middle B.P glass segment should be of 6” height on each of all the three sides of armour coverage.

• The upper segment of the cabin above the B.P glass segment will be made of plain, transparent toughened glass of 10 mm thickness.

• The framework will be of M.S steel square pipe.

• Protection level–III as per Requirements (protection from 7.62 mm SLR or AK-47 bullets or splinters of 36HE hand grenade from 10 metres)Complete outer area of roof will be made of FRP

• Complete Outer & Inner area of the B.P. Steel will be covered with water-proof plywood.

• The outer colour on the lower B.P steel segment will be of blue and red stripes.

• Fan & CFL Lamp with provision for electrical connection will be fitted inside the cabin.

• Approximate weight of the security cabin should be 475 kg +/- 5% All steel items should have protective anti-rust coating.

• The door on rear-side should be made of FRP and of dimension 6-feet height and 2.5 feet width without Bullet Proof Material.

• Minimum internal height should be 8 feet.

• The outer surface of the roof should be such that water should not stagnate, while the cabin will give a flat-top-surface appearance.